XinXiang XinLi Filter Technology Co., Ltd.
XinXiang XinLi Filter Technology Co., Ltd.
Add to Cart
Stainless Steel 316L Fiber Hot Gas Filter Element For Dust-removing
Production description:
It is made of stainless steel 316L fibers with a micron diameter through non-woven laying, stacking, and high-temperature sintering, and then rolled and welded. Usually, the micron rating is 5um, 10um, 15um.
Technical parameters:
| Product ID | OD (mm) | Length (mm) | Filtration area (m2) | Supporting tube | Temperature (°C) |
| XLMFF-1500 | 130/160 | 1500 | 0.61 / 0.75 | Perforated tube/ Support cage | <400 |
| XLMFF-3000 | 3000 | 1.22 / 1.50 | |||
| XLMFF-4000 | 4000 | 1.63 / 2.01 | |||
| XLMFF-5000 | 5000 | 2.04 / 2.51 | |||
| XLMFF-6000 | 6000 | 2.45 / 3.01 | |||
| XLMFF-7000 | 7000 | 2.85 / 3.51 |
Product feature:
1. High temperature resistance(400 ℃), strong thermal shock resistance, corrosion resistance, high strength
2. Handling high wind speed (≥1 m/min)
3. High interception efficiency, emission concentration can be lower than 5mg / Nm3
4. Good air permeability, reduced initial pressure, low energy consumption
5. Online backflush and offline cleaning, good regeneration effect
6. Long working life
Main application:
1. Hot gas filtration during the production of Alumina Oxide
2. Catalyst or precious metal recovery in hot gas processes
3. Power,Steel,Cement,Glass,Chemical,Metallurgical Industry
4. Biomass energy
5.The desulfurization denitration processes
Production and Installation site:
Packaging: